Metal Fabrication

Stamping/Forming forming 

 

G&H originally began as a stamping and tool and die shop.  We continue to service both fields today.  We have presses that range in tonnage from 22 tons up to 170 tons.  This allows us a broad range of material thicknesses to work with.  No job is too big or small.

We also offer 4-Slide and Multi-Slide capabilities as well as standard progressive and compound produced parts.

 

 

View additional metal stamping and forming pictures.

 

 

---

 

The Trumpf TruPunch 2020 is an extremely dynamic punching machine with which sheet metal parts can be fabricated quickly and accurately through an entirely automatic system. 

 

      

Technical Specifications

Working Range (XxY)  ₁	100X x 50 in	Max. accelerations ₂		TRUMPF CNC            Control	Bosch type 3
		X axis	472 in/s
Capacities		Y axis	315 in/s	Programmable parts chute
Max. sheet thickness	0.25 in	C axis	200 1/s	Max. part size	8 x 8 in
Max. punching force	20 tons
Active presser foot	0.4 - 2 tons	Tools		Space requirements  ₄
Max. work piece         weight	330 lbs	Linear magazine	19 tools	Including safety              enclosures
		No. with                     MultiTool	19 - 190 tools
Speeds		MultiTool	5/10	Electrical power          consumption
X axis	3543 in/min			Average power              consumption, approx.	9 kW
Y axis	2362 in/min	Tool change          times		Standby operation,         approx.	0.7 kW
Simultaneous (X and Y)	4252 in/min	Single tool	< 3.5 s
C axis	180 rpm	MultiTool	< 0.9 s
Max. stroke rate          punching (E = 1 mm)	900 1/min
Max. stroke rate          marking approx.	2,200 1/min	Accuracy ₃
		Positioning accuracy	+/- 0.004 in
		Repeatability	+/- 0.001 in
1	Without repositioning
2	Up to 220 lb sheet weight
3	The accuracy in the work piece depends on, among other things, the type of work piece, pre-treatment, sheet size and its position in the work area, According to VD/DGQ 3441. Measuring length 3 ft.
4	Approximate Values. The exact data can be found in the latest installation plan.